Hovoríme po slovensky!
Powador-14.0-TL3
KACO Powador 14.0 TL3 Wechselrichter
Podobný obrázok alebo ilustračná fotka
BVS Electronics: Certifikovaná kvalita
Opravy podľa smernice o strojových zariadeniach 2006/42/ES
Ďalšie výhody BVS
Využívate:
- BVS OPRAVA / REKONDIČNÁ OPRAVA PRODUKTU • Kompletné opravy s rekonštrukciou produktu • Opravy a výmena aj pre zastarané moduly • Preventívna výmena všetkých komponentov, ktoré boli identifikované ako slabé miesta alebo opotrebované časti • Voliteľná expresná oprava • Preventívne rekonštrukčné balíčky (ECOFIT) • Umývanie a čistenie každého modulu pred opravou • Funkčné a záťažové testy • Používanie komponentov schválených výrobcom / legislatívou
- BVS SLUŽBA • Hotline 24/7 • Dlhodobé analýzy a koncepcie zásobovania • Veľmi atraktívne cenové podmienky • Doprava zdarma do 30 kg • Bezplatná technická hotline • Servis a konfigurácia na mieste
- BVS DOSTUPNOSŤ • Viac ako 1.000.000 modulov dostupných 24/7 • Kurýrna služba 24/7 • Rôzne možnosti dopravy • Vlastné HMI / IPC • Expresné letecké zásielky
- BVS KVALITA • Záruka 24 mesiacov* • Vysoká technická odbornosť a moderné diagnostické systémy • Kompletná dokumentácia">Všetky výhody v tooltip, keď kurzor umiestnite sem.
Vaše výhody s BVS Electronics
Už nepotrebné komponenty? Premeníme ich na hotovosť!
Vykupujeme nezávisle od výrobcu – či už chybné alebo plne funkčné. Rýchlo, jednoducho a za férové ceny.
Požiadajte o ponuku teraz!
📞 Tel.: +49 6181 95404-207
✉️ E-mail: ankauf@bvs-electronics.com
KACO Powador 14.0 TL3 inverter
With the Powador 9.0 TL3 to 18.0 TL3 transformerless three-phase inverters, PV systems up to several hundred kilowatts can be planned extremely flexibly in small, highly efficient units.
For optimum adaptation, the units work with two separate MPP trackers, which can be loaded both symmetrically and asymmetrically: Each tracker is capable of handling almost the entire AC power. This means that all typical requirements of more complex designs can be met, for example the full occupancy of an east-west roof (symmetrical load) or the regular occupancy of a south-facing roof without having to forego the solar yield of a dormer (asymmetrical load).
A parallel connection of the MPP trackers is also possible. This saves installation work (including an additional external disconnector) if strings are to be combined before the inverter. Two strings can be connected per MPP tracker, i.e. four strings per device.
The input voltage range is designed extra wide: From 250 V, the devices switch to the grid and during operation they feed in even at 200 V. This means that they can not only secure the solar yields of comparatively small areas such as dormers or carports, but also work longer during the day. The peak efficiency is 98 % and the European efficiency is also above average. The compact design with a weight of only 40 kg in combination with the DC connection via solar plugs makes installation very easy and cost-effective.
Perfect communication is easy with the devices. They are equipped with an integrated data logger with web server, a graphic display to show the operating data as well as a USB port to upload firmware updates. The yield data can be retrieved and evaluated both via USB and the web server. The integrated data logger can also be connected directly to the Powador-web Internet portal for professional evaluation and visualisation of the inverter data.
A number of country presets are programmed into the inverters, which can be easily selected on site during installation. Regardless of this, the desired operating language can be set. The inverters comply with all directives and, from software version 1.16, support the functions of the Powador-protect for the purpose of grid and system protection as well as power management in accordance with EEG 2012.
With the Powador 9.0 TL3 to 18.0 TL3 transformerless three-phase inverters, PV systems up to several hundred kilowatts can be planned extremely flexibly in small, highly efficient units.
For optimum adaptation, the units work with two separate MPP trackers, which can be loaded both symmetrically and asymmetrically: Each tracker is capable of handling almost the entire AC power. This means that all typical requirements of more complex designs can be met, for example the full occupancy of an east-west roof (symmetrical load) or the regular occupancy of a south-facing roof without having to forego the solar yield of a dormer (asymmetrical load).
A parallel connection of the MPP trackers is also possible. This saves installation work (including an additional external disconnector) if strings are to be combined before the inverter. Two strings can be connected per MPP tracker, i.e. four strings per device.
The input voltage range is designed extra wide: From 250 V, the devices switch to the grid and during operation they feed in even at 200 V. This means that they can not only secure the solar yields of comparatively small areas such as dormers or carports, but also work longer during the day. The peak efficiency is 98 % and the European efficiency is also above average. The compact design with a weight of only 40 kg in combination with the DC connection via solar plugs makes installation very easy and cost-effective.
Perfect communication is easy with the devices. They are equipped with an integrated data logger with web server, a graphic display to show the operating data as well as a USB port to upload firmware updates. The yield data can be retrieved and evaluated both via USB and the web server. The integrated data logger can also be connected directly to the Powador-web Internet portal for professional evaluation and visualisation of the inverter data.
A number of country presets are programmed into the inverters, which can be easily selected on site during installation. Regardless of this, the desired operating language can be set. The inverters comply with all directives and, from software version 1.16, support the functions of the Powador-protect for the purpose of grid and system protection as well as power management in accordance with EEG 2012.
| Hmotnosť | 50.00 kgs |
|---|---|
| Rozmery (BxHxT) | 60 cm x 55 cm x 80 cm |
| Product Data AC Connection | M40 screw connection and terminal (max. Cross section: 16mm² flexible, 10mm² rigid) |
|---|---|
| Product Data DC Connection | Solar plug |
| Product Data Euro efficiency in % | 97 |
| Product Data Display | yes |
| Product Data Transformer | no |
| Product Data Height (mm) | 690 |
| Product Data Interfaces | Ethernet, USB, RS485, S0 output |
| Product Data Length (mm) | 200 |
| Product Data Maximum input current (A) | 2 |
| Product Data Nominal AC power (W) | 12500 |
| Product Data Amount MPP Tracker | 2 |
| Product Data Amount phases | 3 |
| Product Data Protection class (EU) | IP65 |
| Product Data DC voltage range (V) from | 200 |
| Product Data DC voltage range (V) until | 800 |
| Product Data Standard manufacturer warranty (years (opt)) | 5 |
| Product Data Weight (kg net) | 40 |
| Product Data Width (mm) | 420 |
| Product Data C ° working temperature range from | -25 |
| Product Data C ° working temperature range until | 60 |
* 24-mesačná záruka na nové diely, kompletné repasácie, ako aj repasované náhradné diely a diely na výmenu. Pri kompletnej repasácii, výmenea predaji náhradných dielov neuplatňujeme len naše preventívne opatrenia, ale pre každú elektronickú konštrukčnú zostavu vykonávame rozsiahle funkčné a záťažové testy. Okrem toho používame originálne a bezpečné komponenty, a zaručujeme tak bezpečnosť používaných konštrukčných zostáv podľa noriem smernice o strojových zariadeniach 2006/42/ES.
** Na typ služby „Čistenie a kontrola“ neposkytujeme žiadnu záruku.
Spoľahlivé meniče majú cenu zlata!
Zistite, koľko peňazí strácate kvôli prestojom – s našou kalkulačkou strát meniča.
Porucha meniča neznamená len technické problémy – znamená peniaze, ktoré vám pretekajú medzi prstami. Tieto straty môžu byť značné a závisia od mnohých faktorov: vašej výkupnej ceny, kapacity vášho meniča a cenných výrobných hodín, ktoré stratíte počas prestoja.