BLUEPLANET-50.0-TL3-M1

KACO Blueplanet 50.0 TL3 M1 inverter 3-phase, 50 kW PV inverter for max. 70 kWp DC generator output, 10 string connections, integrated DC disconnector, DC-Plus string fuses, DC overvoltage protection type 1+2 / AC overvoltage protection base element Compact and lightweight for wall mounting Wide MPP range for longer strings Inverter overload of up to 40 % possible Large cable cross sections possible for copper and aluminium cables Cost-effective NA protection in conjunction with Powador-protect IP65 aluminium housing for outdoor use Input voltage up to 1,100 V for flexibility and safety in DC design Cos phi 0.3 ind. to 0.3 cap. adjustable for special reactive power requirements The Blueplanet 50.0 TL3 S, B and M support large cable cross-sections on the DC and AC sides. Your advantage: less line losses, less sub-distribution. You can lay copper cables as usual - or choose the cheaper aluminium. On the AC side you also have a choice of cables for the Blueplanet 50.0 TL3 XL. On the DC side, Sunclix connectors make installation easier for you. Thanks to the compact design, you can easily transport the inverter and conveniently suspend and retract it - even on the module rack. The housing made of durable aluminium is suitable for outdoor installation. With a power derating that only starts at +50 °C, the inverter is ideally suited for use in very hot regions. OD+: the ideal inverter for coastal regions In the OD+ model variant, inverters from KACO new energy are permanently resistant to corrosion by salty air. If a minimum distance to the sea of 2000 metres must normally be maintained, you can install OD+ inverters only 500 metres from the coast. The testing of the devices is based on the IEC 60068-2-52:1996 standard, Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution).